Build me a bike
Service Description
The biggest frustration these days when buying a modern bicycle is the fact that you will most likely have to change some components to make the bike fit you 100% Its more common to purchase a bike with integrated handlebars and stem these days, and this lead to a lot of confusion as to what size is actually correct for you, the same can be said for crank lengths and seatpost offsets With this service we offer to build you a bike to your body's needs and limitations, i.e. shorter cranks if your hips are blocked or shorter integrated stem if your torso and arm length fall outside of the norm. If you're not set on a specific brand and open to multiple options we can offer you some choices in frames (Road or Gravel) and components (wheels,bars,stems, seatposts) You as the client will have full say in what groupset and components your bike needs to be fitted with, we will offer the correct size in them. The service has two parts to it (90min Each) 1st part, will be the intake discussion and fit bike analysis to determine sizes, we will also discuss pricing and options, throughout the process of building the bike we will be in contact via mail or messages 2nd part, This is where we do the final bikefit on your new bike . This includes all measurements included in the Expert bikefit service (Feel free to have a look at what we do in this service) By the end of this service you will walk out of the studio with a bike built and fitted to your needs and goals. All warranties will apply as per EU law.
Cancellation Policy
Please respect that we work on a booking system - so if you need to cancel, please do so at least 24 hours before your session to allow others to make a booking in your cancelled space
Frequently asked questions
Depending on what service you want, the prices may differ. Please look at the following page to get an overview of the services and the prices Book Now | Cyclofitt
Please bring the following with you:
1. A clean bike
2. Cycling clothes (both cycling bib and shirt)
3. Cycling shoes
There are different durations dependent on which service you choose - the times vary between 1h30 and 2h30.
For all bike-fitting sessions we do the following:
Intake interview where discuss expectations and any concerns
Body assessment - where we determine: muscle balance, flexibility, mobility, identification of posture disorders, bending ability of individual body parts.
Measurement of foot pressure as well as foot tilt (arch and foot analyses).
Optimal position: selection of the height of the saddle and handlebars, stem parameters, retraction of the saddle, angle of the saddle, angle of the handlebars and cockpit, length of the bike.
Detailed analyzes of foot support in terms of three-dimensional movement (wedges, spacers, variable q-factor, activation or support of the foot, de-rotation of the trunk, change of the support plane, passive or active compensation of asymmetry.)
Video record of before-after position and change analysis.
Tensometric measurements of pressure on the saddle, pelvic oscillation, recording pressure in all positions of the hands on the handlebars.
Measurement of the distribution of the center of gravity of the body on the bike.
A detailed feedback report from the entire bikefitting session - we send it by e-mail.
A basic set of exercises to improve functional symmetry and stretch, physiotherapy recommendations - if necessary.
Assembly of bicycle components on site: stems, spacers, saddle, seatposts, etc.
During the session , we will assemble any necessary bicycle components on site: stems, spacers, saddle, seatposts, etc. and where adjustment of height or angles is required, we will do it as part of the session.
We ensure that when you are done with the session - everything will be adjusted and added - so allow you to be in the correct position.
Go ahead and book the bike fit option you wish to do , however, just put it in the comments section (when booking) that you will bring an additional bike. I will be in contact with you, should there be any things that I need to confirm
You will get a 25% discount off the second fit.
Our bike sizing services are aimed at our clients that are on the market to buy a new bike and want to make sure they buy the right bike and size. We advise you on brands, sizes based on your measurements.
The service starts with a comprehensive assessment of the client's current saddle and bike setup. During this assessment, I will gather important data on the client's cycling position, anatomical measurements, and riding style. This information is then used to create a customized pressure mapping protocol tailored to the client's specific needs.
Next, the client saddle is fitted with specialized pressure sensor sleeve. These sensors are capable of measuring the pressure distribution across the saddle and provide real-time feedback to the bike fitter.
Using this data, the bike fitter can make informed recommendations on saddle adjustments or changes, as well as, saddle type that will optimize the client's pressure distribution and improve overall comfort and performance on the bike. The bike fitter may also provide advice on other areas of the bike setup, such as handlebar position or pedal alignment, that can affect saddle pressure distribution. The bike fitter can also provide demo saddles to fit that allows the client to feel the difference.
The Saddle Pressure Mapping Service provides numerous benefits for cyclists, including reduced discomfort and fatigue, improved performance, and decreased risk of injury. With the service, cyclists can ride longer, harder, and with greater confidence, knowing that their bike setup is optimized for their unique needs.